DTF Heat Press Instructions
Get professional, long-lasting results with your Dprintclothing DTF transfers. Follow our simple step-by-step instructions to achieve the best possible finish.
Standard DTF & SmartColour DTF Transfers
Both our Standard DTF and SmartColour DTF transfers use the same heat press application settings.
Temperature: 145°C
Pressing time: 8–10 seconds
Peel method: Hot peel
Second press: 3–5 seconds
Step-by-Step Application

- Prepare your garment. Place the garment on your heat press and pre-press it to create a smooth fabric surface.
- Position your transfer. Place the DTF transfer onto the garment in your desired position.
- Apply heat. Press at 145°C for 8–10 seconds. Polyester garments can be pressed at temperatures as low as 135°C.
- Hot peel. Carefully remove the transfer film while it is still hot.
- Second press. Cover the printed design with silicone paper or a Teflon sheet and press again for 3–5 seconds.
Removing the Transfer Film

For Standard DTF and SmartColour DTF transfers, remove the carrier film while the transfer is still hot.
Once the film has been removed, complete the recommended second press using silicone paper or a Teflon sheet.
Your garment is now ready to be folded and packed!
Important: Heat press performance can vary. You may need to increase the temperature or pressing time if your press is not reaching the correct heat.
DTF Transfer Aftercare

To help keep your DTF printed garments looking their best, we recommend the following care instructions:
- Wash inside out to help protect the print.
- Machine wash at a maximum temperature of 30°C.
- Do not tumble dry.
- Do not iron directly onto the print.
Need Help?
If you have any questions about applying your DTF transfers, our team is happy to help.
Email: info@dprintclothing.com